Garage floor coating in Orlando
- 01Grind & repairDiamond grinding opens the concrete, cracks filled
- 02Base coatEpoxy or polyurea base rolled over the slab
- 03Flake broadcastDecorative flakes broadcast to full coverage
- 04TopcoatClear UV-stable polyaspartic seals and adds gloss
Full-flake epoxy, polyurea and polyaspartic garage floors: diamond-ground, moisture-tested and finished with a UV-stable topcoat that handles hot tires, oil and Central Florida heat.
A garage floor that stays down
When a garage floor in Orlando peels, the story is almost always the same: a big-box kit rolled onto pressure-washed concrete, no grinding, no moisture test. Summer heat and hot tires lift it within a season.
We diamond-grind every slab, repair cracks and spalls, test for moisture and install a professional system: an epoxy or polyurea base, a full broadcast of decorative flakes and a clear polyaspartic topcoat that will not yellow when the door is open all day.
The result is a textured floor that is easy to clean and stands up to oil, hot tires and chemicals, in garages from Winter Garden and Windermere to Lake Nona, Oviedo and Lake Mary.
Every garage floor includes
- Diamond grinding and dust-controlled vacuum
- Crack, joint and spall repair
- Moisture test and primer
- Full flake broadcast in your color blend
- Clear UV-stable polyaspartic topcoat
Garage coatings we install
We recommend a system after seeing your slab and how you use the garage.
Full-flake epoxy system
Base coat, full flake broadcast and clear polyaspartic topcoat: our standard system for Orlando garages.
Polyurea / polyaspartic system
Faster cure and better UV resistance for garages with the door open all day.
Solid color epoxy
A clean single color for workshops and utility spaces.
Non-slip finish
Extra anti-slip grit in the topcoat for ramps, steps and garages that get wet.
Metallic garage floor
High-gloss metallic for show garages and collectors.
Warehouses & workshops
Durable coatings for warehouses, workshops and commercial bays.
Garage floors we've coated
Full-flake systems and high-gloss metallic show garages.
Epoxy vs polyurea
vs polyaspartic
Three coating chemistries do most of the work on Central Florida garage floors:
| System | Best for | Sun / UV | Back in use | Notes |
|---|---|---|---|---|
| Epoxy | Enclosed garages, workshops | Can amber in direct sun | Walk ~24 h, park in several days | Thick, strong base coat; budget-friendly |
| Polyurea | Fast-turnaround systems | Good | Often within a day | Flexible, fast-curing; usually a base coat |
| Polyaspartic | Open garages, workshops | UV-stable — stays clear | Walk in hours, park in ~1–2 days | Premium topcoat from the polyurea family |
| Hybrid flake system | Most Orlando garages | UV-stable top | 1–2 days | Epoxy or polyurea base + flake + polyaspartic top |
Need extra grip? Any system can get an anti-slip aggregate in the topcoat. Cure times vary with temperature and humidity — we give exact timing for your floor.
From bare concrete to finished garage
Most garages are done in 1–3 days.
Free assessment
We check the slab, moisture and how you use the garage.
Written quote
System, colors and a fixed price in writing.
Grind, repair, coat
Diamond grinding, crack repair, base coat and flake broadcast.
Topcoat & cure
Clear topcoat, cure time and you are back to parking.
Garage floor coating cost in Orlando
Price depends on garage size, slab condition and the system.
Starting prices for typical Orange, Seminole and Osceola counties projects. Your fixed price is set after a free on-site visit and slab test.
How much does a garage floor coating cost in Orlando?
A full-flake system starts from about $1,350 for a one-car garage and about $2,250 for a two-car garage. Slab condition and any old coating removal set the exact price.
How soon can I park on it?
Usually after 1–2 days with a polyaspartic topcoat. We give you exact times for your system and the weather that week.
Will hot tires make it peel?
Not when the coating is bonded to properly ground concrete. Hot-tire peeling is a prep problem, which is why we diamond-grind every slab.
Can you coat over my old peeling floor?
No. The old coating is ground off first; a new floor on top of a failing layer fails with it.
Before you hire, read this
Related epoxy services in Orlando
Service area: Garage floor coatings in Orlando, Winter Park, Lake Nona, Dr. Phillips, Windermere, Winter Garden, Kissimmee, Celebration, Lake Mary, Altamonte Springs, Oviedo, Sanford, Clermont and Apopka.